Please choose your language:

Agromatic AG

Measuring and control systems
for mills, feed mills and silos

Control and monitoring units
for the food processing industry

Download or Print Page

Agromatic AG - Made in Suisse

Agrogran N©® System

The components of the Agrogran N©® system consist of different components.
Agromatic dampening systems are a compact system with all necessary units and can be supplied as set upon request.



Agrogran N©® dampening system consists of cordinated components and is configurated for the different throughput capacities. The system is supplied as complete set for easy assembly; on site only the mechanical and electrical water connections have to be made.

 

The Agrogran N©® dampening system is very easy to use. All date important to the miller can be used online. The system can be wired. Depening on the required configuration in the milling diagramme it is possible to dampen with one, with two or even with three steps.


The system components are:

  • electronic unit ACU 200E
  • entry of quantities and control AMZR
  • water dosage ACU 200W
  • measuring track ACU200M
  • measuring track ACU 200N



additional information

PDF: Agrogran N©® System

Electronic Unit ACU200N

aus Articles
Articlenumber 0005052
Frog of the complete dampening system Agrogran N
Abbildung

Registeres all data such as:

 

  • incoming grain volume
  • water content of the grain
  • temperature of the grain
  • Specific weight (hectolitreweight) of the grain (online)
  • water addition amount

Calculates the necessary water amount based on the preadjustments (on-line).
Checks the water amount added by the water dosage unit ACU200W and corrects the value online if necessary.
Controls the dampening 2 and 3 with multistep dampening systems.
Continually monitors the dampening screw.

 
Electronic unit, integrated in wall housing

 

  • size: l 380 h 300 w 160mm.
  • easiest operation
  • possibility of connecting a remote display
  • possibility of setting alarm limits
  • direct connection to superior PC (SPS) via RS485 interface possible
  • code-protected

 


AMZR Dosage Control

aus Articles
Articlenumber see underneath
Registration, measurement or controlling of the incoming grain volume
Abbildung
  • All units with attached electronic unit with RS 485  communication interfaces
  • Easy operation, low height (all units only 445mm)
  • All units power supply 24 VDC
  • Direct connection to ACU200E
  • available in ATEX version
  • when regulating air connection 2 - 10 Bar
  • signal output 0/4 - 20mA
  • impulse output



Versions:

 

  • AMZR12 articlenumber 0007151 0,2 - 15 to/h ATEX
  • AMZR15 articlenumber 0007155 0,4 - 30 to/h ATEX
  • AMZR30 articlenumber 0007170 5 - 100 to/h ATEX

Water dosage ACU200 W

aus Articles
Articlenumber 0005054
Abbildung
  • is directly addressed by ACU200E
  • controls the water amount which should be added
  • checkback signal
  • depending on capacity the unit is constructed in ½" or ¾ " pipes
  • standard water dosage capacities 0 - 5000l/h
  • available in ATEX version

 

Construction: compact in plastic cabinet with door, sizes h 600 l 400 w 220mm

 

 

Optional:

 

  • Articlenumber 0005065
    • heating water dosage with temperature controller, avoids freezing of the water dosage:
    • Attention: water pipes must be heated separately! 

Measuring track ACU20 M

aus Articles
Articlenumber 0005053
The measuring track is the part of the dampening system measuring the grain humidity. Height and diameter vary according to the capacity per hour.
Abbildung

 

  • Standard measuring track 300kg – 15t/h diameter 120mm height 980mm

Different systems:

 

  • up to 25to/h d = 150mm  h = 1200mm
  • up to 30to/h d = 200mm  h = 1620mm
  • up to 70to/h d = 250mm  h = 1860mm
  • larger capacities on request



Measuring track contains:

 

  • product water content measurement
  • product temperature registration
  • cont. measurement of specific weight (hectolitreweight)
  • is directly connected to ACU200

 


Dampening Screw ACU200N

aus Articles
Articlenumber see underneath
Abbildung
  • slant dampening screw, running with low speed, made of 100% stainless steel
  • complete with inlet flange and outlet flange with integrated screw paddles and scutcher
  • monitoring via ACU200E, water inlet depending on size  ½ or ¾“. 
  • with cleaningdoor, optional peumatically operated for emptying at standstill of the dampening system
  • directly monitored via ACU200E, however without motor contactor and thermal power 

 

 

Versions:

 

  • articlenumber: 0005001 up to  3 to/h
  • articlenumber: 0005002 up to  5 to/h
  • articlenumber: 0005003 up to  8 to/h
  • articlenumber: 0005004 up to 12 to/h
  • articlenumber: 0005005 up to 20 to/h
  • articlenumber: 0005006 up to 30 to/h
  • Articlenumber: 0005007 up to 40 to/h
  • larger on request 

aus Articles

 

Contact Information:

Agromatic AG Goldingerstrasse 30 CH-8637 Laupen/ZH Tel. (0041) 55 256 21 00 E-Mail