Agromatic AG - Made in Suisse

Articlenumber 5060001

Combined speed-/alignment monitoring unit for connection of up to 10 sensors

PDF Download:
→ monitoring unit ALS 906

 

 

• optical single alarms per signal output
  
• 2 pot-free relay output
  
• pre-programmed for conveyor control (start delay, tolerances etc.)
• for direct connection of all mentioned sensors (except for temperature)
• auxiliary supply 24 VDC 
• 2 conveyors or one twin conveyor can be monitored at the same time
  
• easy individual configuration at site
  
• internal logbook up to 128 entries
  
• assembly directly on DIN 32 rail
  
• optional: RS 485 data interface
• measuring range 5 to 9999 rev/min
  

The unit can be universally used as: 

• ALS906 D speed monitor (base shaft)
  
• ALS906 D/D differential speed monitor (base and drive shaft)
  
• ALS906 D/S combined unit speed - alignment
  
• ALS906 D/D/S/S combined unit differential speed and alignment top and bottom shaft
  
• ALS906 D/D/S/S/S/S combined unit for twin conveyors with continuous base shaft for monitoring differential speed,
  conveyor 1 and 2 alignment top and bottom
  

 

Additionally the following units can be connected to all mentioned units:

• burst clap sensor (art 0004005)
• and or inlet- or outlet sensor  (art 0003704)

Articlenumber 0005262

10-Channel limit temperature monitoring unit for safety control of bearing temperatures of one or two conveyors simultaneously. Also motor temperature can be monitored.

• connection of up to 10 temperature sensors art 0001207, 0001218 etc. Optical single alarm per signal input
  
• up to 4 pot-free relay alarm outputs
  
• for direct connection of all mentioned temperature sensors or all mentioned with sensor element PT10K
• auxiliary voltage 24 VDC
  

 

2 Conveyors can be monitored at the same time.
Easy individual configuration at site.

• internal logbook up to 128 entries
  
• assembly directly on DIN 32 rail
  
• optional: RS 485 data interface

additional information

• PDF: ALT 605 Elevator
• PDF: Safety monitoring ALS 906
  

Articlenumber 0002011 230VAC Articlenumber 0002012 24VDC

Combined speed- alignment control unit for connection of up to 5 sensors. Most popular unit on the market.

The unit is pre-programmed upon supply for e.g. :

• ALS196 D only speed monitor
  

• ALS196 D/D differential speed monitor
  

• ALS197 S alignment monitor
  

• ALS197 D/S combination speed-alignment
  

• ALS197 D/S/S combination speed bottom shaft monitoring and alignment at top and bottom 
  

 

• assembly directly on DIN 32 rail
  

• for auxiliary voltage see article number
  

additional information

• PDF: ALS 197
• PDF: ALS 906