Sensors
Optomagnetically triggering sensor for detecting the misalignment of elevators with plastic buckets.
- prevention of sparking and frictional heat
- required for category 2 or 3 elevators according to TRGS725
- with LED switch indicator
- built-in rod monitoring
- auxiliary voltage 10 – 35VDC
- power consumption 0.5 – 5.5W
- output PNP/NC/200mA at 24VDC
- operating temperature: -20°C to +60°C
- connection cable min. 1.5m, 3-pole with shield
- IP safety class 65
- approved for application with zone separation
art. 2120
Brochure ASLS2000
Inductive sensor for detecting the misalignment of elevators with metal buckets.
- prevention of sparking and frictional heat
- required for category 2 or 3 elevators according to TRGS725
- with LED switch indicator
- switching distance: 20 – 80mm
- auxiliary voltage 10 – 35VDC
- power consumption 0.5 – 5.5W
- output PNP/NC/200mA at 24VDC
- operating temperature: -20°C to +60°C
- connection cable min. 1.5m, 3-pole with shield
- IP safety class 65
- approved for application with zone separation
art. 3060005
accessories:
- art. 3714 Sight Glass Separation Plate with Viton O-Ring
- Art. 308007 art. 3080007 Bracket
Inductive sensor for monitoring the speed of the elevator belt.
- metal housing: M12x1mm with two nuts
- length: 61mm
- connection cable min. 2m, shielded
- LED switch indicator
- increased interference protection
- switching distance: 4mm
- operating temperature: -20°C to +60°C
- operating voltage range: 10-30VDC
- maximum switching current: 200mA NC
- IP safety class 67
- approved for application in ATEX zone 22
art. 4005
Inductive sensor for monitoring the speed of the elevator belt.
- plastic housing: M18x1mm with two nuts
- length: 63mm
- connection cable min. 2m, shielded
- LED switch indicator
- increased interference protection
- switching distance: max. 8mm
- operating temperature: -20°C to +60°C
- operating voltage range: 10-30VDC
- maximum switching current: 200mA NC
- IP safety class 67
art. 4027
accessories:
- art. 3080014 Speed Detector Roto for 18 and 30mm Sensors
Inductive sensor for monitoring the speed of the elevator belt.
- metal housing: M30x1.5mm with two nuts
- length: 43mm
- connection cable min. 2m, shielded
- LED switch indicator
- increased interference protection
- switching distance: max. 15mm
- operating temperature: -20°C to +60°C
- operating voltage range: 10-30VDC
- maximum switching current: 200mA NO and NC
- IP safety class 67
- approved for application in ATEX zone 22
art. 3060002
accessories:
- art. 3080014 Speed Detector Roto for 18 and 30mm Sensors