Skip to main content

Sampler

Sampling spear for manual sampling.

  • reliable sampling through 8 single, oblique slot perforations, with offset opening. This ensures that the sample is taken homogeneously over the entire length of the sampling spear.

  • light metal version
  • length: 1.5m (art. 6555: 2m)
  • Ø 40mm
  • other lengths or diameters on request

art. 6554


Screw sampler for automatic sampling.

  • sampler complete with sample tube
  • slot perforation longitudinal, 3x 14mmx50mm
  • made of steel, electropolished, chrome-plated
  • Ø 54mm (art. 6512: Ø70mm)
  • mounting flange tube: stainless steel with welded normal steel nozzle
  • turnable 45° angle
  • angular geared motor: 3x400V / 50Hz / 180VA
  • delivery without control unit, must be ordered separately
  • also available as ATEX version: art. 6040001: Ø 54mm / art. 6040002: Ø 70mm

art. 6511


accessories:

  • art. 6040011 Sampler Control Unit ASP212/S

Sampler control unit for direct control of screw sampler ASP297/P.

  • built into plastic switch cabinet
  • transparent plexiglass viewing door
  • ready for operation with two functions via external input: impulse = impulse operation / continuous signal = continuous operation
  • supply voltage 3x400V / 50Hz with main switch
  • auxiliary contacts for peripheral devices

art. 6040011

Grain sampler for fully automatic sampling of vehicles.

  • basic unit with mast height of 3.6m
  • for mounting on concrete base (height: 70cm)
  • swivel head with rotary drive, frequency converter controlled
  • with standard boom for sampling over 320 degrees
  • sampling radius: 2.9m
  • sampling tube standard, length 2.45m
  • automatic reset on contact with the vehicle floor
  • high-performance vacuum turbine for sample conveying distance up to 20m (max. 60m possible)
  • sampling cyclone with receiving bucket for wall mounting
  • scope of delivery:
    • completely pre-assembled unit with boom and mast
    • built-in rotary, lifting and lowering motors
    • complete electrical control and simple operating unit
    • switch cabinet pre-mounted on mast
    • vacuum turbine incl. 20m highly flexible conveying hose (Ø 38mm), with built-in earth wire
    • standard receiving bucket 10l (Cycloburo)

For an individual consulting please contact Agromatic.

Grain sampler with boom for fully automatic sampling of vehicles.

  • basic unit with mast height of 3.6m
  • for mounting on concrete base (height: 70cm)
  • swivel head with rotary drive, frequency converter controlled
  • with standard boom for sampling over 320 degrees
  • extended sampling area: radius: 3.6m / 4.1m / 5.0m
  • sampling tube standard, length 2.88m
  • automatic reset on contact with the vehicle floor
  • high-performance vacuum turbine for sample conveying distance up to 20m (max. 60m possible)
  • sampling cyclone with receiving bucket for wall mounting
  • scope of delivery:
    • completely pre-assembled unit with boom and mast
    • built-in rotary, lifting and lowering motors
    • complete electrical control and simple operating unit
    • switch cabinet pre-mounted on mast
    • vacuum turbine incl. 20m highly flexible conveying hose (Ø 38mm), with built-in earth wire
    • standard receiving bucket 10l (Cycloburo)

For an individual consulting please contact Agromatic.

Grain sampler for fully automatic sampling of vehicles.

  • mounted on running rail, 10m lengthwise movable
  • basic unit with adapted stand height, mounting on concrete base
  • swivel head with rotary drive, frequency converter controlled
  • with standard boom for sampling over 320 degrees and swivel range of 4.1m
  • sampling tube standard, length adjusted
  • automatic reset on contact with the vehicle floor
  • high-performance vacuum turbine for sample conveying distance up to 20m (max. 60m possible)
  • sampling cyclone with receiving bucket for wall mounting
  • scope of delivery:
    • completely pre-assembled unit with boom and two masts
    • built-in rotary, lifting and lowering motors
    • complete electrical control and simple operating unit
    • switch cabinet pre-mounted on mast
    • vacuum turbine incl. 20m highly flexible conveying hose (Ø 38mm), with built-in earth wire
    • standard receiving bucket 10l (Cycloburo)

For an individual consulting please contact Agromatic.

Grain sampler for fully automatic sampling of tank and silo trucks.

  • mounted on running rail (2 axes)
  • basic unit with adapted stand height, mounting on concrete base
  • straight stitch with vertical lance
  • sampling tube standard, length adjusted
  • automatic reset on contact with the vehicle floor
  • high-performance vacuum turbine for sample conveying distance up to 20m
  • sampling cyclone with receiving bucket for wall mounting
  • scope of delivery:
    • completely pre-assembled unit with boom and two masts
    • built-in rotary, lifting and lowering motors
    • complete electrical control and simple operating unit
    • switch cabinet pre-mounted on mast
    • vacuum turbine incl. 20m highly flexible conveying hose (Ø 38mm), with built-in earth wire
    • standard receiving bucket 10l (Cycloburo)

For an individual consulting please contact Agromatic.